The GS-15 is new to our range and is a first-class shredder. Thanks to its solid and stable construction, it is an especially robust device and is also suitable for commercial use. In its operational state, the shredder weighs 200 kg. But thanks to the large rubber tires and ingenious weight distribution (with the high-power engine being placed in the middle), it can be easily moved. Small corridors and doors are also not an obstacle for the GS-15 as it is only 80cm in width.
Thanks to the high ejection chute, which can be turned 180°, the woodchips can be directly expelled onto a trailer. This prevents having to tediously move the shredded material from the floor to the trailer by hand. The throw distance can be set at the ejector itself.
According to the texture of the wood the shredder shreds branches of a maximum diameter of 12 cm!
The GS-15 feeds material into the shredder itself with formidable power, thanks to the 2 rotating blades which rotate on the heavy barrel and run against a counter blade. The barrel blades can also be turned and can be used a second time.
Additionally the filling hopper can easily be opened with quick release clips, which makes maintenance and cleaning work a lot easier. The upper filler neck can be inserted after work to save space. This means efficient work is preprogrammed.
Using the supplied towing hook, the machine can be towed with ease to any location. The shredder is also very maintenance-friendly. Parts such as cutting blades, bed blade, etc., are easy to reach. In a few easy steps you can remove the whole hopper in order to gain better access to wear parts. The bearings are also equipped with grease nipples.
The powerful 15 HP CE approved gasoline engine gives you complete independence from the power grid so that the shredder can even be used in remote locations.
Electric Start Engine Model Working on Youtube:
Recoil Start Model Working test:
The chipper are with 2 high standard safety devices.
Safety device 1: Engine comes equipped with a recoil starter and can, if necessary, be turned off directly at the hopper using the emergency switch. This means you can stop the machine immediately in case of danger or if the hopper gets clogged.
Safety device 2: Open hopper sensor. This safety device prevents the machine from operating with an opened hopper. This will protect users.
Max. branch cutting diameter
Gasoline engine pulley belt transmission
Rated output power
Jiangdong, Lifan or Locin
Motor cubic capacity
Engine start mode
Recoil or Electric start
12V Battery Included
Number of belt
Number of pulley
1 big clutch pulley+1 small pulley
Number of Knife
2 cutting knives on rotor + 1 counter blade
Bottom wheels size
Wood chips size
Chipping output capacity
Feeding hopper length
Machine net weight
Machine with package weight
Machine with safety chains and 2 inches ball and coupler