This product is no longer available

ATV Flail Mower

Overview

The  ATV flail mower is fitted with a powerful petrol engine. Tow-behind design for quads, ATVs cars, or lawn tractors.

These machine are the perfect solution for those who do not own a tractor and require a powerful and reliable crusher mower.

This flail mower is very sturdy and it can be used to crush small shoots, grass and small shrubs.

Equipped with a side tow hook so you can connect it both to quads and to ride on mowers.


Features and Description

Mower with hammer flails for ATV

Working width 120cm or 150 cm

Fit wheels for stability and compliance at the sides or for maximum accessibility at the back

Sturdy rubber balloon wheels (16-6.50×8)

The wheels are individually height-adjustable with a spring-locked crank to prevent the crank moving backwards as a result of vibration

Adjust the angle of penetration with the turnbuckle under the tow bar

Skids at the sides for stable, smooth operation

Mudguard at the front to reduce the risk of stone chipping – HIGH LEVEL OF SAFETY!

15 hp engine with oil level monitor

Now available option with a Briggs & Stratton 13.5hp petrol engine 


Increase speed with a flail mower fitted with a flap

Fitted with a flap at the back, which releases the grass to avoid excessive accumulation under the hood. You save on fuel and reduce wear on the belts, and you can also operate at a higher speed than an ATV flail mower without a flap. The grass is also spread more evenly

Deals with tougher vegetation such as tussocks, roots and stones.

Used primarily for topping pastures, parks and road verges

Stable construction.

Flail mower built for a long service life, so that you can spend your money on something else

Grease nipples on support and rotor roller bearings

Sealed cover over the belts

The whole construction is well-protected but easy to access for cleaning, servicing and repair

Wide support roller at the rear

The tow bar has three fixed lateral adjustments

Tips for use

For best results, and a longer service life for belts, we recommend mowing at a speed of 10 km/h if the grass is of normal height. For higher grass, raise the mower to its maximum and mow twice.


Technical Specifications

Technical Data AT-120 AT-150
Dimensions (LxBxH)mm 2000x1900x900 2000x2200x900
Total weight 240kg 263kg
Working width 1150mm 1450mm
Recommended grass height < 35cm
Adjustable mowing height 20 – 70mm
Tire size 16“ x 6.5“ – 8“
Trailer connector 2'' ball head coupling
Working efficiency 2100 – 2500m²/h 2500 – 3000m²/h
Drive system 3 belt system 17mm,   centrifugal clutch
Engine max. power 15hp
Displacement 420cc
Starter mode recoil starter  (E-starter optional)
Fuel tank 6,5L
Fuel consumption approx. 1.5-2.0 L/Std.
Fuel Unleaded Gasoline
Rotor shaft diameter / material strength 108mm / 8mm
Rear roller  diameter / material strength 102mm / 5mm
Material strength mower housing 4mm
Material strength side walls 6mm
Painting Powder Coating
Flails type Flail hammer, Forged and Galvanized
Number of flails 28 32
Weight per flail hammer 320gr
Rotor RPM recommended / max. 2500 / 3200
Iron Steel Crate Packing(LxWxH) 155x85x80cm 185x85x80cm


ATV Backhoe Digger

15HP Gasoline Engine Wood Chipper